THe Kalmatron Advantage

KALMATRON is a chemically balanced inorganic cementitious compound which waterproofs and modifies cement to improve its undeveloped features for use in building materials. In other words, the worse initial recipe or quality of cement containing mix or structure, the higher effectiveness of KALMATRON. The whole KALMATRON family is represented by ADMIXTURES and COATINGS products, i.e. applicable for improving of fresh cement containing mixes and for repair of aged and damaged concrete and masonry structures.

  • High Early Strength
  • Higher Compressive Strength
  • Shrinkage down by up to50% over control
  • Freeze/Thaw resistance up to 350 cycles
  • Increased density and reduces possibility of cracking
  • Extremely high acid and chemical resistance
  • Improved tensile and flexural strength
  • Is cheaper than original concrete fix up to 12 %
  • Does not require silica fume, fly ash, AEA, plasticiser or water reducer

KALMATRON is a chemically balanced inorganic cementitious compound which waterproofs and modifies cement to improve its undeveloped features for use in building materials. In other words, the worse initial recipe or quality of cement containing mix or structure, the higher effectiveness of KALMATRON. The whole KALMATRON family is represented by ADMIXTURES and COATINGS products, i.e. applicable for improving of fresh cement containing mixes and for repair of aged and damaged concrete and masonry structures. All of the products described below are powders packaged by 10 Kg or 25 Kg of the net weight into the standard plastic containers.


Super Concrete Additive

The Transformation of Concrete from Porous to Solid Building Material.

We are the distributor of KALMATRON, a SUPER CONCRETE ADDITIVE that we believe has no equal in the United States or world-wide. Unlike other additives that are only fillers and plasticizers, which over time are repelled by concrete, KALMATRON is a powder composition that is chemically close to cement. It becomes HOMOGENOUS with concrete.

    Briefly, here is what it does:

A. Used in pure form, as a 3mm-5mm layer on old or new concrete, it will penetrate 50 to 150 mm and make the concrete 100% impermeable to water, sea water, oil, sewage and most chemicals. As a 3mm-5mm layer, it is ideal for repairing old deteriorating concrete structures, buildings, bridges, and tunnels. KALMATRON covers these structures, penetrates deep into the old concrete, and stops further deterioration. This is achieved at a tiny fraction of the cost and time needed for replacing the structure.

Used as an ADDITIVE to CONCRETE MIX, it will hydrate all the cement grains (with much less water), it will make concrete very DENSE, it will take compression strength up 20%, (or flexural strength up 20%). It will take RUPTURE RESISTANCE up 30% and COROSION RESISTANCE of the rebar to 100%.